|
Single Normal Probe
|
These are designed for excellent sensitivity Lower frequency probe is available for better penetration Orientation straight or at 90 deg. With BNC connector.
|
10mm, 15mm, 20mm, 25mm & 10mm
|
1.25 Mhz to 5 MHz & 6 to 10 MHz
|
|
Double Normal Probe
|
These are designed for optimum resolution and excellent sensitivity. The main advantage of these probes is minimum cross talk between the elements. They are supplied with high Strength flexible cable with internal anchoring and strain relief system. Large probes come with BNC connectors on the topside
|
10mm, 15mm, 20mm, 25mm & 10mm
|
2 MHz to 5 MHz & 5MHz
|
|
Normal Probe with Protective membrane
|
Replaceable nylon caps are provided for the above normal probes for use with rough but relatively flat surfaces. They provide better coupling and minimize wear and tare of the probes.
|
10mm & 24 mm dia
|
1.2 & 4 MHz
|
|
Hard Face Probes
|
These are specialy developed for use on very rough surfaces to avoid fast wear and tare. The material used for front face has very high impact resistance and is rugged to ensure extended service life
|
10mm , 15mm, 20mm, 25mm,
|
1.25 to 5 MHz
|
|
Finger Tip Probes
|
Fingertip probes are ideal for flaw detection in limited access area and rough surface. A very rugged small finger tip probe using hard front face material specifically designed for superior penetration, single to noise ratio and optimum service life. Single normal or Double normal.
|
5mm, 8mm & 10mm
|
1 to 10 MHz
|
|
Angle Probes (37, 45, 60, 70, 80 deg.) & Surface Probes
|
Angle beam Perspex wedges design provides better transmitting and receiving properties within the wedge body, reducing spurious echoes caused by reverberation withing. These wedges are replaceable with threaded normal probes as desired. The advantage with these probes is that a specimen can be tested with different angle by simply replacing the wedge. Drawback is high dead zone. They are available from 5 deg. to 30 deg. and in rectangular shape as well.
|
Single angle 9 x 8mm & 20 x 22 mm
10mm & 25 mm dia. Double angle 9 x 8 mm
|
1.25, 2, 4 & 5 MHz
As above
|
